Automatic Approach
Automatic approach to the correction position
To facilitate and speed up the calibration procedure, FOCUS has introduced the automatic approach to the correction position on all balancing machines equipped with electric brake that are not provided with automatic positioning system. Once the measuring launch is completed, the wheel automatically stops around 15° from the exact point of application of the counterweight, allowing […]
Continua ›
Virtual Sonar
The innovative FOCUS software which detects the rim width
What is it? Virtual Sonar is the new FOCUS software which enables, in the absence of an actual sonar device, to detect the rim width of steel rims without having to enter them in manually. The software automatically calculates the rim width from the first correction plane and checks its reliability based on the measured unbalance and […]
Continua ›
KIT ADAS CCD
ADAS positioning system
FOCUS ADAS CCD KIT allows positioning of the CCD sensors on any ADAS/ACC calibration structure by means of universal adapters and, through a very quick and simple software included in the alignment program, enables to facilitate the positioning. WHY?Before carrying out the calibrations of ADAS and ACC systems it is necessary to check alignment of the […]
Continua ›
OPB: ONE PLANE BALANCING
CORRECT BOTH STATIC AND DYNAMIC UNBALANCES: ONE PLANE, ONE WEIGHT, HALF TIME
OPB is the innovative FOCUS program that enables a 40% balancing time saving. Static unbalance is the source of most vibrations felt by the driver. On the current wheel balancers, even if it is possible to balance only the static, it is very difficult not to increase the residual dynamic value, with the consequent risk to […]
Continua ›
AUTOADAPTIVE MODE
THE NEW TOLERANCE CALCULATION SYSTEM
With traditional wheel balancing, a wheel is considered balanced when the residual imbalance is less than 5 g per plane, independent of the wheel’s dimensions and weight. The vibration a driver perceives when driving, considering whatever imbalance, also sources from the wheel’s weight and shape. The heavier the wheel is the less a residual imbalance […]
Continua ›
LASER SPOTTER
Perfect balancing in just one spin!
Greatest accuracy during the positioning of stick-on weights through laser spotter: perfect balancing in just one spin. Preview of the exact weight positioning spot visible already during the wheel dimensions acquisition phase. During the correction, the LASER SPOTTER pinpoints the exact position for stick-on weights application inside the rim. Thanks to the electric brake – […]
Continua ›