Digital hand-spin balancer, power supply 12V / 24V / 220V
FT206 has been developed for mobile service but its flexibility of use is also appreciated in many garages and tire shops.
It is equipped with trolley wheels which allow movement in the appropriate working areas desired.
Battery power supply (optional).
The gear box eases operator’s efforts when spinning large and heavy wheels.
- Detection of wheel data
The automatic gauge enables auto-input of wheel distance and diameter and displays relative balancing program required (clip-on or stick-on weights). No errors due to manual inputs.
The machine allows operator to work according to his preferences. The correct positioning of counter-weights can be displayed in two different modes: with the accuracy of position repeater or the conventional 12 o’clock position.
- Programs: ALU S - SPLIT - UNBALANCE OPTIMIZATION (MATCHING)
FT206 features all the latest prorams for unbalance corrections:
– ALU S: unlimited “stick-on weight” positions
– SPLIT: hidden weight mode (behind the spokes)
– Minimization of residual static unbalance.
|Single phase power supply||115 / 230V - 50 / 60 Hz|
|Max. absorbed power||0,5 kW|
|Balancing speed||< 100 rpm for vehicle / 70 rpm for truck|
|Measuring cycle for wheel||8 ÷ 20 s|
|Measurement uncertainty||±0,5 g|
|Resolution||1 g for vehicle / 10 g for truck|
|Average noise||< 70 dB (A)|
|Rim width setting range||1.5” ÷ 20” / 40 ÷ 510 mm|
|Rim diameter setting range||10” ÷ 30” / 265 ÷ 765 mm|
|Min./Max. compressed air pressure||7 ÷ 10 Kg / cm2 | ~ 0.7 ÷ 1 MPa; | ~ 7 ÷ 10 bar; | ~ 105 ÷ 145 psi|
|Max. wheel weight||< 250 kg|
|Machine weight||180 kg|
For wheels with a central hole of 45-180 mm Ø. Made up of 4 cones, a spacer ring and a lock nut with handwheel.
SR 215/2 41FF67879
To centre wheels with 8 holes on 275/285,75 mm Ø and with 10 holes on 225/285,75/335 mm Ø. They are supplied with two spiders and a pre-centering ring. Pre-centering on the central hole and on the guided stud bolts allows higher accuracy and centering without damaging alloy rims.
Cone IV-V + GG disc 41FF43821
To centre truck or bus wheels with a central hole of 202 / 221 / 281 mm Ø by means of cones. Made up of two cones and a spacer.