F780
High Performance digital automatic balancing machine
A high-performance digital wheel balancer with innovative design developed to ease and quicken every phase of balancing operation.
- Ergonomic design
A balancing machines developed to offer the operator the best possible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch panel are only but a few of the advantages developed for our end users.
- Detection of wheel data
The automatic gauge for distance and diameter input (up to 28″ rims) and the LA Sonar device for wheel width measurement allow an immediate detection of all necessary wheel parameters.
- Adhesive counter-weights positioning by means of SPOTTER Laser
Wheel locked in position for weight applications, LED light to illuminate working area in the internal part of rim and SPOTTER Laser for accurate positioning of the counter-weights guarantee a perfect balancing operation in one single spin.
- OPB: One plane balancing
OPB (One Plane Balancing), eliminates both static and dynamic unbalance with a single counterweight, indicating the exact position to apply the weight inside the rim. The balancer automatically detects if it is possible to correct both unbalances with only one weight, and activates OPB program (One Plane Balancing). A real revolution in wheel balancing. OPB saves you time and money while maximizing your productivity.
- AutoAdaptive Mode
The innovative tolerance calculation system AutoAdaptive Mode is based on the evaluation of the residual imbalance limit value corresponding to an acceptable perceived vibration. For each wheel that is balanced, the software AutoAdaptive Mode detects weight and dimensions and calculates the tolerance value that will cancel any vibration perceived on the steering wheel. AutoAdaptive Mode grants the highest comfort when driving, and together with OPB Program, saves balancing time.
- Automatic Approach
Once the measuring launch is completed, thanks to the Automatic Approach system, the wheel automatically stops around 15° from the exact point of application of the counterweight, allowing the operator to position it correctly with a little movement.
- Pneumatic locking of wheel (SE version)
Two gas springs which produce a force of 250 kg guarantee a quick and constant wheel locking. The 4 wheel tyre set is balanced in the same conditions.
Standard
Optional
| Single phase power supply | 115 / 230 V 50 / 60 Hz |
| Max. absorbed power | 0,15 kW |
| Balancing speed | 100 rpm |
| Measuring cycle for 15 kg (33 lb) wheel | 4.7 s |
| Measurement uncertainty | ±0,5 g |
| Resolution | 1 g |
| Average noise | < 70 dB (A) |
| Rim width setting range | 1.5” ÷ 20” or 40 ÷ 510 mm |
| Rim diameter setting range | 10” ÷ 30” or 265 ÷ 765 mm |
| Min./Max. compressed air pressure | 7 ÷ 10 kg / cm2 | ~ 0.7 ÷ 1 MPa | ~ 7 ÷ 10 bar | ~ 105 ÷ 145 psi (SE version) |
| Max. wheel weight | < 75 kg |
| Machine weight | 120 kg |
-
Standard adapter set with 3 cones, Ø45÷110mm and quick locknut GL40.
Zero gravity effect
Wheel loading and removal without effort or adjustment
PERFECT CENTERING
Wheel automatic lifting – Ideal centering and more accurate balancing.
QUICK
Quicker than any other traditional lift – A single pedal controls the whole working cycle.
AUTOMATIC
Electronic system with PLC.
UNIVERSAL
Applicable to any balancing machine
RL cup 41FF79255
Large diameter plastic cup with rubber ring for alloy rims protection (used on GL/GLM).
UH20/2 41FF42048
For wheels 3,4,5,6, holes (95÷210 mm pitch circle Ø) with/without central hole (Renault, Peugeot and Citroën). Back centering double cone for high precision. Centering error pratically halved compared to similar adaptors on the market.
Peugeot – Citroën kit 41FF73171
High precision set of 1 bush Ø 60 + 2 cones (Ø 62÷68mm and Ø 54÷60mm). Developed on Peugeot and Citroën specs.
VL/2 cone + G36 disc 41FF86174
Kit for light truck wheels (Ø 97÷170mm centre hole).
SR4 – SR4/SE – SR5 – SR5/SE SR5/2 SR5/2/SE – SRUSA – SR/USA/SE
Stud adapter for rim protection and high precision centering for 4 or 5 holes rims. With studs which use two piece spring washers which guarantee a pressure uniformity on all points.
Renault kit 41FF77152
High precision set of 5 bushes (Ø60 / 66 / 71 / 88 / 129,9mm). Developed on Renault specs.
MT cone 40FF57321
High precision stepped cone for Porsche – Audi – Volkswagen – Opel – BMW Smart and other brands. (Ø56,5 / 57 / 66,5 / 72,5mm centre hole).
Mercedes kit 41FF88003
High precision set of 3 cones (Ø57- Ø66,5 -Ø84/85 mm) + Back spring. Developed on Mercedes Benz specs.
