Automatic balancing machine with laser line
A balancing machine with ample monitor and intuitive graphical display which, combined to its large ergonomic weight tray, conveys prestige to the tire shop and transmits a sense of efficiency and professionalism to end users.
- Ergonomic design
A balancing machines developed to offer the operator the best possible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch panel are only but a few of the advantages developed for our end users.
- Detection of wheel data
The automatic gauge enables detection of distance and diameter up to 28″ rims with relative activation of desired balancing program (clip-on or stick-on weights). No error due to manual inputs possible. The machine enables the operator to work according to his preferences. The correct application of counterweights can be selected in different modes: with the accuracy of position repeater, with the speed of laser beam or the conventional 12 o’clock position.
- Automatic Approach
Once the measuring launch is completed, thanks to the Automatic Approach system, the wheel automatically stops around 15° from the exact point of application of the counterweight, allowing the operator to position it correctly with a little movement.
- LA Sonar
The LA sonar, for width measurement, enables an immediate entry of all necessary wheel data.
- Adhesive counter-weights positioning with laser beam
Wheel locked in position for weight applications through electric brake and laser beam indicating position guarantee an easy and extremely quick balancing operation.
- Pneumatic locking of wheel (SE Version)
Two gas springs which produce a force of 250 kg guarantee a quick and constant wheel locking. The 4 wheel tyre set is balanced in the same conditions.
|Single phase power supply||115 / 230 V 50 / 60 Hz|
|Max. absorbed power||0,15 kW|
|Balancing speed||100 rpm|
|Measuring cycle for 15 kg (33 lb) wheel||4.7 s|
|Measurement uncertainty||±0,5 g|
|Average noise||< 70 dB (A)|
|Rim width setting range||1.5” ÷ 20” or 40 ÷ 510 mm|
|Rim diameter setting range||10” ÷ 30” or 265 ÷ 765 mm|
|Min./Max. compressed air pressure||7 ÷ 10 kg / cm2 | ~ 0.7 ÷ 1 MPa | ~ 7 ÷ 10 bar | ~ 105 ÷ 145 psi (SE version )|
|Max. wheel weight||< 75 kg|
|Machine weight||120 kg|
Standard adapter set with 3 cones, Ø45÷110mm and quick locknut GL40.
Zero gravity effect
Wheel loading and removal without effort or adjustment
Wheel automatic lifting – Ideal centering and more accurate balancing.
Quicker than any other traditional lift – A single pedal controls the whole working cycle.
Electronic system with PLC.
Applicable to any balancing machine.
RL cup 41FF79255
Large diameter plastic cup with rubber ring for alloy rims protection (used on GL/GLM).
For wheels 3,4,5,6, holes (95÷210 mm pitch circle Ø) with/without central hole (Renault, Peugeot and Citroën). Back centering double cone for high precision. Centering error pratically halved compared to similar adaptors on the market.
VL/2 cone + G36 disc 41FF86174
Kit for light truck wheels (Ø 97÷170mm centre hole).
SR4 – SR4/SE – SR5 – SR5/SE SR5/2 SR5/2/SE – SRUSA – SR/USA/SE
Stud adapter for rim protection and high precision centering for 4 or 5 holes rims. With studs which use two piece spring washers which guarantee a pressure uniformity on all points.
Renault kit 41FF77152
High precision set of 5 bushes (Ø60 / 66 / 71 / 88 / 129,9mm). Developed on Renault specs.
MT cone 40FF57321
High precision stepped cone for Porsche – Audi – Volkswagen – Opel – BMW Smart and other brands. (Ø56,5 / 57 / 66,5 / 72,5mm centre hole).
Mercedes kit 41FF88003
High precision set of 3 cones (Ø57- Ø66,5 -Ø84/85 mm) + Back spring. Developed on Mercedes Benz specs.