img

F685

New generation digital wheel balancer

It’s a versatile balancer, with LA Sonar for wheel width measurement and available also in pneumatic locking version. The laser line, supplied as standard, eases the positioning of adhesive counter-weights, increasing the balancing precision.

Ergonomic design

A balancing machines developed to offer the operator the best posssible working conditions. Every tool in a handy position, total access to internal part of rim, all accessories within reach and touch panel are only but a few of the advantages developed for our end users.

Detection of wheel data

The automatic gauge enables detection of distance and diameter up to 28″ rims with relative activation of desired balancing program (clip-on or stick-on weights). No error due to manual inputs possible. The machine enables the operator to work according to his preferences. The correct application of counterweights can be selected in different modes: with the accuracy of position repeater, with the speed of laser beam or the conventional 12 o’clock position.

Automatic Approach

Once the measuring launch is completed, thanks to the Automatic Approach system, the wheel automatically stops around 15° from the exact point of application of the counterweight, allowing the operator to position it correctly with a little movement.

LA Sonar

The LA sonar for width measurement enables an immediate entry of all necessary wheel data.

Adhesive counter-weights positioning with laser beam

Wheel locked in position for weight application through electric brake and laser beam indicating position guarantee an easy and extremely quick balancing operation.

Pneumatic locking (SE Version)

Two gas springs which produce a force of 250 kg guarantee a quick and constant wheel locking. The 4 wheel tyre set is balanced in the same conditions

Standard

Optional

Single phase power supply 115 / 230 V 50 / 60 Hz
Max. absorbed power 0,15 kW
Balancing speed 100 rpm
Measuring cycle for 15 kg (33 lb) wheel 4.7 s
Measurement uncertainty ±0,5 g
Resolution 1 g
Average noise < 70 dB (A)
Rim width setting range 1.5” ÷ 20” or 40 ÷ 510 mm
Rim diameter setting range 10” ÷ 30” or 265 ÷ 765 mm
Min./Max. compressed air pressure 7 ÷ 10 kg / cm2 | ~ 0.7 ÷ 1 MPa | ~ 7 ÷ 10 bar | ~ 105 ÷ 145 psi (SE version )
Max. wheel weight < 75 kg
Machine weight 120 kg

  • Standard adapter set with 3 cones, Ø45÷110mm and quick locknut GL40.

Zero gravity effect
Wheel loading and removal without effort or adjustment

PERFECT CENTERING

Wheel automatic lifting – Ideal centering and more accurate balancing.

QUICK

Quicker than any other traditional lift – A single pedal controls the whole working cycle.

AUTOMATIC

Electronic system with PLC.

UNIVERSAL

Applicable to any balancing machine.

RL cup 41FF79255

Large diameter plastic cup with rubber ring for alloy rims protection (used on GL/GLM).

UH20/2 41FF42048

For wheels 3,4,5,6, holes (95÷210 mm pitch circle Ø) with/without central hole (Renault, Peugeot and Citroën). Back centering double cone for high precision. Centering error pratically halved compared to similar adaptors on the market.

Peugeot – Citroën kit 41FF73171

High precision set of 1 bush Ø 60 + 2 cones (Ø 62÷68mm and Ø 54÷60mm). Developed on Peugeot and Citroën specs.

VL/2 cone + G36 disc 41FF86174

Kit for light truck wheels (Ø 97÷170mm centre hole).

SR4 – SR4/SE – SR5 – SR5/SE SR5/2 SR5/2/SE – SRUSA – SR/USA/SE

Stud adapter for rim protection and high precision centering for 4 or 5 holes rims. With studs which use two piece spring washers which guarantee a pressure uniformity on all points.

Renault kit 41FF77152

High precision set of 5 bushes (Ø60 / 66 / 71 / 88 / 129,9mm). Developed on Renault specs.

MT cone 40FF57321

High precision stepped cone for Porsche – Audi – Volkswagen – Opel – BMW Smart and other brands. (Ø56,5 / 57 / 66,5 / 72,5mm centre hole).

Mercedes kit 41FF88003

High precision set of 3 cones (Ø57- Ø66,5 -Ø84/85 mm) + Back spring. Developed on Mercedes Benz specs.

    Name (mandatory):

    Email (mandatory):

    Company (mandatory):

    Country (mandatory):

    Notes:

    [recaptcha]


    I hereby authorize CEMB S.p.A. for the treatment of my personal data according to the current Italian directives (Law No. 196 of June 30th, 2003). (Compulsory)